Al 99.7 W/R

EN ISO 18273 - S AI 1070 (AI99.7)
AWS A5.10: ER/R 1070

Characteristics

Not heat-treatable wrought pure Aluminium 1xxx group.

Description

Pure Aluminium with high conductivity and corrosion resistance.

Al 99.8 W/R

EN ISO 18273 - S AI 1080A (AI99.8/A)
AWS A5.10: ER/R 1080A

Characteristics

Not heat-treatable wrought pure Aluminium 1xxx group.

Description

Pure Aluminium with high conductivity and corrosion resistance.

Al 99.0 Cu W/R

EN ISO 18273 - S AI 1100 (AI99.0Cu)
AWS A5.10: ER/R 1100

Characteristics

Not heat-treatable wrought pure Aluminium 1xxx group.

Description

Pure Aluminium with high conductivity and corrosion resistance.

Al Si 5 W/R

EN ISO 18273 - S Al 4043 (AlSi5)
AWS A5.10: ER/R 4043

Characteristics

Wrought aluminium alloy for filler metals purposes.

Description

Al Si 5 is a silicon alloyed aluminum welding wire for GTAW and GMAW. It’s used to weld Al-Si and Al-Mg-Si alloys. Suitable for welding cast aluminum and wrought alloys containing up to 7% Si. Al Si 5 has excellent flow characteristics and it’s not recommended for anodizing.

Al Si 7 Mg W/R

EN ISO 18273 - S Al 4018 (AlSi7Mg)
AWS A5.10: ER/R 4018

Characteristics

Heat-treatable Aluminium filler alloy for TIG and MIG welding.

Description

AlSi7Mg alloy is a special aluminum-silicon alloy for MIG and TIG welding. The presence of Mg allows it to respond effectively to heat treatment. It is used for welding and repairing heat-treatable foundry alloys such as AlSi7Mg and 357.0. After heat treatment, the weld bead acquires the same mechanical properties as the base metal. The alloy, like all 4xxx alloys, has excellent flow characteristics and low sensitivity to hot cracks.

Al Si 12 W/R

EN ISO 18273 - S Al 4047A (AlSi12(A))
AWS A5.10: ER/R 4047A

Characteristics

Wrought aluminium alloy for filler metals purposes.

Description

Al Si 12 is a high silicon alloyed aluminium welding wire for welding Al-Si alloys with more than 7% silicon content. Thanks to its low melting temperature, that minimize parent metal distortions, Al Si 12 is very often used to braze cast aluminium components, wrought alloys, extrusions and sheets. When used with flame torch, it’s recommended to use the alloy with our flux KIROBRASAL or KIROBRASAL NEUTRO. This alloy has excellent flow characteristics. Al Si 12 is not recommended when anodising is required.

Al Mg 3 W/R

EN ISO 18273 - S Al 5754 (AlMg3)
AWS A5.10: ER/R 5754

Characteristics

Wrought aluminium alloy for filler metals purposes.

Description

Aluminium alloy for GMAW and GTAW welding of Al Mg, Al Mn, Al Mg Si and Al Zn Mg alloys with a Mg content up to 3%. Al Mg 3 has good corrosion-resistance and it’s frequently used to weld 5xxx and 6xxx series base material that have to be anodized. Very good esthetical results after anodizing (excellent colour match).

Al Mg 5 W/R

EN ISO 18273 - S Al 5356 (AlMg5Cr(A))
AWS A5.10: ER/R 5356

Characteristics

Wrought aluminium alloy for filler metals purposes.

Description

Aluminium alloy for GMAW and GTAW welding but also for other special welding processes of Al Mg, Al Mn, Al Mg Si and Al Zn Mg alloys. Al Mg 5 has good corrosion-resistance and it’s frequently used to weld 5xxx and 6xxx series base material that have to be anodized. AlMg5 is not suitable in the application at high temperature (Twork >65 °C).

Al Mg 2.7 Mn W/R

EN ISO 18273 - S Al 5554 (AlMg2.7Mn)
AWS A5.10: ER/R 5554

Characteristics

Wrought aluminium alloy for filler metals purposes.

Description

Aluminium alloy for GMAW and GTAW welding. AlMg2.7Mn has been specially designed to avoid the risk of Stress Corrosion Cracking in the application at high temperature (Twork >65 °C). It’s used to weld 5454 alloy, even in heterogeneous welding with 6xxx alloys.

Al Mg 4.5 Mn W/R

EN ISO 18273 - S Al 5183 (AlMg4.5Mn0.7(A))
AWS A5.10: ER/R 5183

Characteristics

Wrought aluminium alloy for filler metals purposes.

Description

Al Mg Mn welding wires and rods for GMAW and GTAW welding, with an high tensile and corrosion strength. To be used with Al Mn, Al Mg, Al Mg Si, Al Zn with a working tempera-ture below 65.5 °C. AlMg4.5Mn, in the as-welded conditions, meets the tensile specification requirements of alloy 5083.

Al Mg 5 Mn W/R

EN ISO 18273 - S Al 5556A (AlMg5Mn1(A))
AWS A5.10: ER/R 5556A

Characteristics

Wrought aluminium alloy for filler metals purposes.

Description

Al Mg Mn welding wires and rods for GMAW and GTAW welding. Between the non heat treatable alloys, AlMg5Mn filler metal provide the highest tensile strength in the as-welded conditions. Not suitable if the working temperature of the welded piece is higher than 65 °C.

Al Mg 4.5 Mn Zr W/R

EN ISO 18273 - S Al 5087 (AlMg4.5MnZr(A))
AWS A5.10: ER/R 5087

Characteristics

Wrought aluminium alloy for filler metals purposes.

Description

Al Mg Mn welding wires and rods for GMAW and GTAW welding with high tensile strenght and corrosion resistance. To be used with Al-Mn, Al-Mg, Al-Mg-Si, Al-Zn alloys with a work-ing temperature below 65.5 °C. The Zirconium content acts as a grain refiner, improving the toughness and corrosion resistance of the alloy. Al Mg 4.5 Mn Zr alloy has a reduced risk of hot cracks compared to the 5183 alloy.